Check other

✔ Since the original headlights‘ circuit is controlled by the car driving computer, the working principle and current of LED headlights are different from the original halogen lamps. The driving computer may not be able to detect the feedback signal of the LED headlights, which causes the dashboard to display error messages. Therefore, you must install the LED decoders to resolve all the fault alarms caused by modifying the LED headlights.
✔ Canbus decoders can solve the following problems:1. Headlights failure message on the dashboard;2.High beam failure message on the dashboard;3.LED headlights hyper-flashing or flickering;4. The engine stops working when turning on the LED headlights;5. The LED Headlights stop working When the engine is ignited;6.LED headlights automatically turn off after lighting up for a few minutes.7.Radio interference and buzzes.
✔ EXCELLENT COMPATIBILITY: Fits for universal 9008/H13 led headlight/Fog-light bulbs. Compatible with Controller Area Network (CANBUS) systems or electrical system vehicles.Such as 2009 Dodge, Ram, Ford, GMC Chrysler, Chevrolet, Hyundai, Kia, and More.
✔ PLUG-N-PLAY: Easy Installation. All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 5-10 minutes;
✔ Worry-free guarantee: With our car decoder, it can solve 95% of the problems after installing led headlights. Please note: Different cars have different situations. We cannot guarantee a 100% effective solution to all problems.

Since the original headlights‘ circuit is controlled by the car driving computer, the working principle and current of LED headlights are different from the original halogen lamps. The driving computer may not be able to detect the feedback signal of the LED headlights, which causes the dashboard to display error messages. Therefore, you must install the LED decoders to resolve all the fault alarms caused by modifying the LED headlights.

Application
Ram 1500: 2006-2014
Ram 2500: 2006-2012
Ram 3500: 2006-2009, 2012
Dodge Caliber: 2007-2012
*Please purchase one set to solve the issue concerning compatibility.


Installation Guide (Very Important)
Step 1. These resistor decoders will get extremely hot while working. Please put on heat-resistant gloves and handle the plastic surface when installing to keep you safe from the heat.
Step 2. Place them where they can get air & on heat-resistant/ non-combustible metal for a longer lifespan. Be cautious to keep them away from headlight housing or other plastic materials.

Canbus decoders can solve the following problems:

• 1.Headlights failure message on the dashboard;
• 2.High beam failure message on the dashboard;
• 3.LED headlights hyper-flashing or flickering;
• 4.The engine stops working when turning on the LED headlights;
• 5.The LED Headlights stops working When the engine is ignited;
• 6.LED headlights automatically turn off after lighting up for few minutes.
• 7.Radio interference and buzzes.

Specification:

• Working voltage: DC 9-16V
• Power compensation: 6.5W-7.5W
• Working temperature: -40 ° C ~ 125 ° C
• Anti-reverse protection mode: input voltage positive isolation, output voltage negative sharing

Package Includes:

• 2x H13/9008 LED Headlights Canbus Decoders